Have you ever faced Linksys AC2200 Velop firmware update failed issue? If you nod in yes, then this post will be a great help to you. Here, in this post, you will get instructions on how fix Linksys AC200 Velop firmware update failed issue in no time. So, without much delay, let’s start over!
Why AC2200 Firmware Update Failed?
For newbies, the Linksys AC200 Velop firmware update fails to load issue can occur due to various reasons. Some of them are listed below:
Security issues with the device
Internet connectivity problems
Issues with the Linksys AC2200 Velop itself
Incorrect Linksys Velop login details
Partial Linksys Velop setup
Wrongly performed firmware update process
Downloaded corrupted firmware version
Now that you are well aware of the reasons behind Linksys AC200 Velop firmware update failed issue, let’s take you through the fixes to troubleshoot the issue.
Corrupted Firmware File Downloaded
Make sure that you have scanned the firmware update file before downloading it. If you do not scan the firmware file, then you might get stuck with the issue. So, navigate to official site of Linksys and get correct and latest firmware version on your device installed.
You may also download the latest firmware version on your device by logging in and accessing the AC2200 settings page.
Spotty Internet Connection
If you are trying to install the latest version of firmware on your AC2200 by accessing the Linksys Velop login page, then keep the below-mentioned points into consideration:
Check if your WiFi-enabled device is connected to the Velop’s WiFi
Check if your Velop is placed in reach of your existing router/ modem
Check whether your Velop is placed away from public WiFi and interference-creating devices in your home like baby monitors, Bluetooth speakers, etc.
WiFi Network Security
On the off chance if the security of your WiFi network is at risk, then you may also face the firmware update failed issue. To get the issue fixed, secure your WiFi by creating an extra strong and unique password by accessing the Linksys Velop login page.
A Faulty Hardware
In the event that the hardware of your desktop or laptop is faulty or corrupted, bear in mind – you will not be able to download and install the latest firmware version on your Linksys AC2200 Velop. To get the issue fixed, drop your concerns into the comments section.
Wired Connectivity Issues
The main reason behind the firmware update failed issue can be due to poor wired connectivity issues. To get it fixed, check if your Linksys Velop and your existing router/ modem is connected properly or not. Also, make sure that your devices are getting sufficient and uninterrupted power supply.
Damaged Ethernet Cable
You can also face firmware update failed issue if there is any damaged or cuts in the wires in the Ethernet cable you have used to connect the Linksys Velop and your router/ modem. Thus, to get the issue fixed, ensure that the Ethernet cable you have used is not having any sort of damages.
Once you’re done with this fix, try to download the latest firmware version on your Linksys AC200 Velop.
Velop Configuration Issue
Keep in mind – if you haven’t performed Linksys AC2200 set up process properly or left or incomplete, then also you may get stuck with firmware updated failed issue. Thus, to make the most out of your Linksys Velop, ensure to configure it properly.
Still getting Linksys AC2200 firmware update failed issue? If so, then the last option you are left with is to power cycle your Linksys Velop. Yes, this process works in 90% cases. In order to power cycle or restart your Linksys Velop, simply unplug your AC2200 from the wall socket, wait for a few minutes, and then plug it back in again.
Thus, by following the fixes listed above, you will surely able to fix the Linksys AC2200 Velop firmware update failed issue. In case of any doubts or queries, feel free to shoot your issues (whatsoever you are facing with your Velop) into the comments section.