If you have decided to perform TP-Link repeater setup in your home, pat yourself on the back. It’s an excellent decision. Configuring a Tplinkrepeater will extend the wireless signals of your existing network and transmit them throughout your home. However, before you install a TP-Link repeater, you need to place it at the right location. Doing so will ensure that you get the best out of your device.
In this article, we have talked about various measures that you need to take while placing your TP Link repeater for its optimal reception and performance. Read on.
- Raise Your TP-Link Repeater
Place the TP-Link wireless repeater at a similar height as that of your home router; usually 4 feet high. The height will help your repeater in receiving the signals from your router properly and ensuring your WiFi-enabled devices are getting a better connectivity.
Also, try placing your repeater high on a bookcase, shelf, or any other location of suitable height instead of keeping it on the floor, in corners, or near thick concrete walls.
- Put the Antennas Vertically
Another thing that you can do to get the best performance of your TP-Link wireless extender is to put its antennas up vertically with the ground.
- Place the Repeater Close to the Router
Keep your TP-Link repeater as close to your home router as you can. Doing so will help your repeater’s antennas to receive and broadcast the signals with much more efficiency. The client devices will also get a faster speed from the repeater.
- Avoid WiFi Interference
When picking the location for your TP-Link wireless repeater, avoid placing it near transmitting appliances, metal objects, electronic devices, and reflexive surfaces. A few examples are given below:
- Cordless phones
- Washing machines
- Baby monitors
- Microwave ovens
- Fish tanks
- Aluminum studs
- Bluetooth speakers
Such things can cause interference or in certain cases, block the WiFi signals of your TP Link repeater, thereby stopping you from configuring it via http://tplinkrepeater.net.
- Enable the AP Mode
In times when the obstacles cannot be avoided or the distance between your TP-Link repeater and router is too much, put the repeater at a place where the WiFi signal is most needed. Connect your wireless repeater to the router using an Ethernet cable and enable it to AP mode.
Once you are done placing your TP-Link wireless repeater at the right location, follow the guidelines mentioned below to configure it.
How to Configure a TP-Link WiFi Repeater?
- Plug your TP-Link WiFi repeater in a working wall socket.
- Press the Power button.
- Let the LED become solid green.
- Create a connection between your TP-Link repeater and router using a wired or wireless source.
- Thereafter, turn on your PC or laptop.
- Launch a web browser of your choice.
- Type tplinkrepeater.net in the address bar of your web browser.
Note: If tplinkrepeater.net refuses to work for you, use the default IP address to log in to your TP-Link wireless repeater.
- Press the Enter key.
- You will get welcomed by the TP-Link repeater login page.
- Enter the default username and password of your device.
Note: If you are not sure regarding the default login credentials of your TP-Link repeater, refer to the user manual. You will find every little detail about your device there.
- Once logged in, click ‘Next’ on the Quick Setup wizard.
- Select Your Region.
- Click Next.
- Your device will scan all the wireless networks in range.
- Choose a network you would like to extend.
- Click Next.
- Enter the WiFi password and select Finish.
In this manner, you will easily be able to perform TP-Link repeater setup by accessing its web user interface.
Note: You can use the TP Link app to configure your TP-Link wireless range repeater.
The Bottom Line
The location of your TP-Link wireless repeater is really important as it controls the overall functionality of your device. If placed correctly, your repeater will offer you the best WiFi performance that you have ever received.