News That Loud

How Can I Fix Netgear Extender Keeps Dropping Issue?


Extender keeps dropping is a common issue faced by Netgear users. If you are also struggling with the same problem and are not able to make the most of your device, then this post covers various troubleshooting tips to help you fix it. All you need to do is walk through the steps below and implement tips on how to fix Netgear extender keeps dropping issue.

Troubleshooting Tips to Fix Netgear Extender Keeps Dropping

Power Cycle Your Extender

The very first step that can be tried by you for fixing the extender keeps dropping issue is to power cycle your device. Here’re how to do that:

  • Disconnect your extender from all the devices connected to it.

  • Unplug it from its power socket.

  • Let your extender sit without power for a while.

  • Now, plug the extender back into its socket and turn on the power button.

  • Connect your client devices to it and check if your extender is now working fine or not.

Update Netgear Extender Firmware

You may also experience the WiFi dropping issue on your extender if the firmware of your device is not being updated to its latest version. To get the issue fixed, consider updating your extender right away. For this,

  • Log in to your extender by accessing web address.

  • Head towards the Settings section and click Check Firmware.

  • If any new firmware is available for the extender model you have, you will be notified about the same.

  • Click Ok to get the firmware updated on your extender.

Keep WiFi Interference at Bay

Another reason that can create the extender keeps dropping issue could be related to WiFi interference. Thus, keep your extender away from;

  • Devices emitting radio waves such as Bluetooth speakers, baby monitors, refrigerators, microwave ovens, and cellular phones.

  • Aluminum studs, reflexive surfaces, concrete walls, and metal appliances can also interfere with the signals of your extender. Thus, keep these things also away from your extender to get rid of the extender keeps dropping issue.

Change Your Extender’s Location

By changing the location of your extender also you can fix the WiFi keeps disconnecting issue. While changing the location of your extender,

  • Keep in mind to place your extender within the range of your router.

  • Make sure to select an area in open. If you will place the extender inside a cabinet or under a table, then also your device will not be able to give you the desired results.

Change WiFi Channel

The WiFi channel that is being used by you for your extender is probably overcrowded due to which you are not able to get the most out of your extender. For getting this fixed;

  • Change the WiFi channel of your extender from the busy one to the less-used.

  • Enable the same for 2.4GHz and 5Ghz bands.

Reset and Reconfigure Your Extender

Perhaps you are facing the extender keeps dropping issue due to the improper or partial setup of your device. If that is the case, reset and reconfigure your extender using the steps below:

  • Locate the Reset button on your extender and press it using a pin-like device.

  • This will take your extender back to its default settings.

  • Once done, initiate the extender reconfiguration process by accessing the web address.

  • As soon as you complete the Netgear extender setup process, connect your client devices to the network of your extender and see if you can now enjoy the internet without any lag.


These are the troubleshooting tips using which you can get rid of the extender keeps dropping issue. Just in case you have any other trick in your mind that can fix the issue, do share that with us and your fellow readers.

Leave A Reply

Your email address will not be published.