An All-Inclusive Guide to Enable Netgear Port Forwarding
Netgear routers have enabled users to access a flawless internet connection in every nook and cranny of their homes. Users can tweak their router’s settings using the 192.168.1.1 IP address and make the most of their WiFi device. All this is possible due to the amazing features of Netgear routers. One such feature is Netgear Port Forwarding. This feature allows users to redirect the traffic from Wide Area Network (WAN) to the Local Area Network (LAN). In this article, we will provide you with a guide to enable Port Forwarding on Netgear routers. But before that, let’s have a brief introduction to the Netgear Port Forwarding feature.
What is Netgear Port Forwarding?
In simple words, the Netgear Port Forwarding feature commands your router to redirect incoming traffic from a specific device to another device. With this feature enabled, users can communicate with devices present in the Local Area Network. It allows users to create servers and run different types of services on their WiFi devices without being restricted from accessing anything.
By enabling Netgear Port Forwarding, you can reduce the incoming traffic congestion on a WiFi network.
Now that you are acquainted with Netgear Port Forwarding, let us guide you on how to enable this feature on your router by accessing the 192.168.1.0 IP address.
Steps to Enable Netgear Port Forwarding
- Power Up Your Router
To begin with, plug your Netgear wireless router into a wall socket and press the Power button. Let the LED light on your Netgear router turn solid green.
Just in case the power LED is blinking or not glowing at all, consider plugging your WiFi device into another wall outlet.
- Connect Your WiFi Devices
The next step is to create a connection between your Netgear router and modem. You can either connect these devices wirelessly or using an Ethernet cable.
Although the wireless connection is good it is recommended to use an Ethernet cable for uninterrupted communication between WiFi devices. Ensure that it is not having any cuts.
- Access the Netgear Router Login Page
Once your WiFi devices are connected properly, you have to access the Netgear router login page. Therefore, switch on your PC and launch any web browser like Google Chrome, Mozilla Firefox, Microsoft Edge, etc. Now, move the cursor to the URL bar of the web browser and type the 192.168.1.0 IP address into it. Thereafter, press the Enter key to go to the Netgear router login page.
Note: If you are unable to access the Netgear router login page using the 192.168.1.0 IP address, then try using 192.168.1.2 instead.
- Log in to Your Netgear Router
On the Netgear router login page, you will be prompted to fill in the default login credentials. So, type the default username and password of your Netgear router into the required fields. Click the Log In button.
Caution: Be careful while typing the default login credentials. The reason being they are case-sensitive. A typo can halt you from enabling the Netgear Port Forwarding feature.
- Enable Port Forwarding
Selecting Log In will take you to the Netgear Genie smart setup wizard. Now, click the Advanced menu and select the Advanced Setup option. Look for the Port Forwarding option. Once there, click the Add Custom Service option and type the descriptive name in the Service field.
Afterward, select a protocol in the Service Type field. If you have no clue regarding the selection of protocol, choose TDC/UDP. Enter the beginning port number and specify the ports. Enter the IP address of the server device into the given field or select it from the list of attached devices. Lastly, click the Apply button.
In this way, you can enable the Port Forwarding feature on your Netgear router. Just in case you come across any issue amidst the process, take the help of the following troubleshooting tips:
Fixed: Issues Faced While Enabling Port Forwarding
- Ensure that your Netgear router is receiving an uniterrupted power supply. If your area suffers power outages, use a UPS.
- Some Netgear routers also support the 10.0.0.1 IP address. So, if you can’t access the router login page using the 192.168.1.2 IP address, use 10.0.0.1 instead.
- Use an updated web browser to enable Netgear Port Forwarding.
Conclusion
This is how you can enable the Netgear Port Forwarding feature on your router. We hope that you will be able to configure this feature on your Netgear router with the help of the aforementioned steps.
